Washer Tank and Motor: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Open the front hood.
Disconnect the ground cable from battery.
Remove the front bumper. < Refer to REMOVAL , Front Bumper. >
Remove the clip of the washer tank duct.

Fig 1: Identifying Washer Tank Duct Clip
Courtesy of SUBARU OF AMERICA, INC.
Remove the washer motor cover, and disconnect the connector.

Fig 2: Identifying Washer Motor Connector
Courtesy of SUBARU OF AMERICA, INC.
Prepare a container before disconnecting the washer hose and drain all washer fluid in the tank.

Fig 3: Identifying Washer Hose And Washer Fluid In Washer Tank
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolts and nuts and remove the washer tank.

Fig 4: Locating Washer Tank Bolts And Nuts
Courtesy of SUBARU OF AMERICA, INC.