Rear Wiper Arm: Installation

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install each part in the reverse order of removal.
Operate the rear wiper once.
Align the blade with the marking (A) of the glass.

Fig 1: Identifying Blade Aligned With Marking Of Glass
Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

Refer to "COMPONENT" of "General Description". < Refer to REAR WIPER , COMPONENT, General Description. >