Rear Washer: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the roof spoiler. (Model with roof spoiler) < Refer to REMOVAL , Roof Spoiler. >
Remove the high-mounted stop light. < Refer to REMOVAL , High-mounted Stop Light. >
Remove the washer nozzle.
CAUTION: Be careful not to scratch the rear gate panel during removal.
1. Using a driver with a narrow tip, etc., push out the nozzle craw from the rear side of rear gate panel.
  
  Fig 1: Removing Rear Washer Nozzle Craw Using Driver
  Courtesy of SUBARU OF AMERICA, INC.
2. Hold the washer nozzle from the outer side of the rear gate, and pull the washer nozzle.
  
  Fig 2: Pulling Washer Nozzle
  Courtesy of SUBARU OF AMERICA, INC.
3. Remove the washer hose (B) from washer nozzle (A).
  
  Fig 3: Identifying Washer Hose And Washer Nozzle
  Courtesy of SUBARU OF AMERICA, INC.