DTC 3A Front Sub Sensor RH False Installation: DTC Detecting Condition

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Front sub sensor (RH) is misinstalled.

Step	Check	Yes	No
1 REPLACE FRONT SUB SENSOR. Turn the ignition switch to OFF, disconnect the battery ground cable, and wait for 60 seconds or more. Replace the front sub sensor (RH) with a genuine sensor. < Refer to REMOVAL , Front Sub Sensor. >	Does the warning light go off?	Finish the diagnosis.	Replace the airbag control module. < Refer to REMOVAL , Airbag Control Module. >