LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Seat Belt System) >> Rear Seat Belt >> Removal >> Outer Seat Belt Assembly RH & LH

Outer Seat Belt Assembly RH & LH

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the luggage floor mat.
  2. Remove the rear seat cushion assembly and seatback shoulder. < Refer to REMOVAL , Rear Seat. >
  3. Remove the seat belt lower anchor bolt.
    Fig 1: Locating Seat Belt Lower Anchor Bolt
    G05957666Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the rear quarter trim. < Refer to REMOVAL , Rear Quarter Trim. >
  5. Remove the nuts, and remove the outer belt assembly.
    Fig 2: Locating Outer Belt Assembly Nuts
    G05957667Courtesy of SUBARU OF AMERICA, INC.
    CAUTION: Do not remove the bolt and nut securing the retractor and bracket.
    Fig 3: Caution For Removing Bolt And Nut Securing Retractor And Bracket
    G05957668Courtesy of SUBARU OF AMERICA, INC.