Front Seat Belt: Installation

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Before installation, make sure that the correct part is used.
Be careful not to twist the seat belts during installation.

Install each part in the reverse order of removal.

Tightening torque:

Front seat belt: < Refer to FRONT SEAT BELT , COMPONENT, General Description. > Front seat assembly: 53 N.m (5.40 kgf-m, 39.1 ft-lb)