Occupant Detection System (Between Airbag Rear Harness And Seat Harness & Belt Tension Sensor)
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- How to disconnect:
Press the lock arm (A) to disconnect the connector.
CAUTION: When pulling the slide lock or disconnecting the connector, make sure to hold the connector rather than the harness. - How to connect:
Hold the connector and push in firmly until it clicks.
CAUTION: Make sure to insert the connector until the connector is locked. Pull lightly to confirm that it is fixed securely.