Section 53 (HVAC System (Auto Ac) (Diagnostics)): General Description: Caution
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Never connect the battery in reverse polarity.
- Doing so may immediately damage the auto A/C control module.
- Do not disconnect the battery terminals while the engine is running.
- A large counter electromotive force will be generated in the generator, and this voltage may damage electronic parts such as auto A/C control module etc.
- Before disconnecting the connectors of sensors and the auto A/C control module, be sure to turn off the ignition switch.
- Auto A/C control module may be damaged.
- Every A/C-related part is a precision part. Do not drop them.
- Airbag system wiring harness is routed near the auto A/C control module and junction box.CAUTION:
- Do not use electrical test equipment on the airbag system wiring harness and connector.
- Be careful not to damage the airbag system wiring harness when servicing the auto A/C control module and junction box.