LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (HVAC System (Auto Ac) (Diagnostics)) >> Diagnostic Chart for Self-Diagnosis >> Operation >> Drive Signal Check Table

Drive Signal Check Table

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
Air flow control dial position Fan speed control dial position Drive signal to check A/C switch LED No trouble Short circuit Open circuit When currently malfunctioning When having malfunctioned in the past
FACE AUTO MIX #1 Blinking (Illuminates for 0.2 sec. ↔ turns off for 0.2 sec.) FRESH/RECIRC switch LED is turned off FRESH/RECIRC switch LED blinks (Illuminates for 0.2 sec. ↔ turns off for 0.2 sec.) FRESH/RECIRC switch LED blinks (Illuminates for 1 sec. ↔ turns off for 1 sec.) Rear window defogger switch LED is turned off Rear window defogger switch LED illuminates
1st MIX #2
2nd MIX #3
3rd - 7th MIX #4
AUTO MODE #1 Blinking (Illuminates for 1 sec. ↔ turns off for 1 sec.)
1st MODE #2
2nd MODE #3
3rd - 7th MODE #4
Drive signal to check No trouble Short circuit Open circuit When currently malfunctioning When having malfunctioned in the past
Air mix door RH #1 30 310 315 AUTO is turned off AUTO illuminates
#2 320 325
#3 330 335
#4 340 345
Air mix door LH #1 350 355
#2 360 365
#3 370 375
#4 380 385
Air flow control door #1 390 395
#2 3A0 3A5
#3 3b0 3b5
#4 3C0 3C5