LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (A/T & M/T Differentials) >> Rear Differential >> Inspection >> Side Gear Backlash

Side Gear Backlash

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Using a dial gauge, check the backlash of side gear.

Side gear backlash: 

0.10 - 0.20 mm (0.004 - 0.008 in) 

If the side gear backlash is not within the specification, select the side gear thrust washer and adjust the side gear backlash.

Fig 1: Checking Backlash Of Side Gear Using Dial Gauge
G05343131Courtesy of SUBARU OF AMERICA, INC.