Rear Differential
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
When replacing a rear differential assembly, select the correct one according to the following table.
NOTE:
Using a different rear differential assembly will cause the drive train and tires to drag or emit abnormal noise.
| Model | 2.5 L non-turbo | |
| 4AT | 5MT | |
| Rear differential type | T-type | |
| Identification | TP | T2 |
| Type of gear | Hypoid gear | |
| Gear ratio (Number of gear teeth) | 4.444 (40/9) | 4.111 (37/9) |
| Oil capacity | 0.8 L (0.8 US qt, 0.7 Imp qt) | |
| Rear differential gear oil | GL-5 | |
| Model | 2.5 L turbo |
| 4AT | |
| Rear differential type | T-type |
| Identification | B1 |
| Type of gear | Hypoid gear |
| Gear ratio (Number of gear teeth) | 4.111 (37/9) |
| Oil capacity | 0.8 L (0.8 US qt, 0.7 Imp qt) |
| Rear differential gear oil | GL-5 |