Tire and Wheel: Inspection: Tires

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

When replacing a tire, make sure to use only tires of the same size, construction and load range as originally installed.

Tire size and tire inflation pressure check < Refer to SPECIFICATION , General Description. >
Cracks, damage and wear check

Tire runout check

Lift up the vehicle.

Slowly rotate the wheel to check rim "runout" using a dial gauge.

Fig 1: Checking Rim Runout Using Dial Gauge

Courtesy of SUBARU OF AMERICA, INC.

Aluminum wheel

Axial runout limit	Radial runout limit
1.0 mm (0.039 in)

Steel wheel

Axial runout limit	Radial runout limit
1.5 mm (0.059 in)

If the rim runout exceeds service limit, replace the wheel.