LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Tires, Wheels & Tire Pressure Monitoring System (TPMS)) >> Tire Pressure Monitoring System >> Removal >> TPMS & Keyless Entry Control Module

TPMS & Keyless Entry Control Module

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

TPMS control module is integrated into keyless entry control module.

  1. Disconnect the ground cable from battery.
  2. Remove the left rear quarter trim. < Refer to REMOVAL , Rear Quarter Trim. >
  3. Disconnect the harness connector.
  4. Remove the bolt and then remove the TPMS & keyless entry control module.
    Fig 1: Identifying TPMS & Keyless Entry Control Module Connector
    G05957972Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals