Section 51 (Tires, Wheels & Tire Pressure Monitoring System (TPMS)): General Description: Specification: Notes

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Inset And P.C.D.

Courtesy of SUBARU OF AMERICA, INC.

Tire size

Wheel size

Inset mm (in)

P.C.D. mm (in)

Tire inflation pressure kPa (kgf/cm² , psi)

Front wheel

Rear wheel

P215/65R16 96H

16 x 6 1/2J
16 x 6 1/2JJ

48 (1.89)

100 (3.94)

⁽¹⁾

P225/55R17 95H

17 x 7J
17 x 7JJ

⁽¹⁾	Size and inflation pressure of the standard equipment tire, spare tire for emergency and appropriate tire for equipment are described on the "Tire inflation pressure" label attached to the body side of the driver's door.

Spare tire size

Wheel size

Inset mm (in)

P.C.D. mm (in)

Tire inflation pressure kPa (kgf/cm² , psi)

Front wheel

Rear wheel

T155/70D17 110M

17 x 4T

40 (1.57)

100 (3.94)

⁽¹⁾

P215/65R16 96H (C4 only)

16 x 6 1/2J
16 x 6 1/2JJ

48 (1.89)

P225/55R17 95H (C4 only)

17 x 7J
17 x 7JJ

⁽¹⁾	Size and inflation pressure of the standard equipment tire, spare tire for emergency and appropriate tire for equipment are described on the "Tire inflation pressure" label attached to the body side of the driver's door.

NOTE:

T-type tire is prepared for temporary use as a spare tire.
Depending on the model destination, the equipped spare tire will differ.