LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Diagnostic Trouble Code (DTC) Detecting Criteria (H4DOTC)) >> Diagnostic Trouble Code (DTC) Detecting Criteria >> DTC P0410 Secondary Air Injection System >> Combination Valve Changeover Pressure Diagnosis

Combination Valve Changeover Pressure Diagnosis

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Perform the RH combination valve stuck closed diagnosis with the variation of delivery pipe pressure when the RH combination valve turns closed → open.

Delivery pipe pressure should vary when the RH combination valve turns closed → open. When the variation is small, determine that the RH combination valve is stuck closed.

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

JUDGMENT VALUE

Malfunction Criteria Threshold Value DTC
Pressure variation value when the RH combination valve is switched < Value of Map 6 P2441

Time Needed for Diagnosis:  4000 ms + 992 ms + 992 ms + 992 ms

Malfunction Indicator Light Illumination:  Illuminates when malfunction occurs in 2 continuous driving cycles.

Judge as OK and clear the NG if the continuous time while the following conditions are established is more than the predetermined time.

JUDGMENT VALUE

Malfunction Criteria Threshold Value DTC
Pressure variation value when the RH combination valve is switched ≥ Value of Map 6 P2441

Time Needed for Diagnosis:  4000 ms + 992 ms + 992 ms + 992 ms

Perform the LH combination valve stuck closed diagnosis with the variation of delivery pipe pressure when the LH combination valve turns open → closed.

Delivery pipe pressure should vary when the LH combination valve turns open → closed. When the variation is small, determine that the LH combination valve is stuck closed.

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

JUDGMENT VALUE

Malfunction Criteria Threshold Value DTC
Pressure variation value when the LH combination valve is switched < Value of Map 7 P2443

Time Needed for Diagnosis:  4000 ms + 992 ms + 992 ms + 992 ms

Malfunction Indicator Light Illumination:  Illuminates when malfunction occurs in 2 continuous driving cycles.

Judge as OK and clear the NG if the continuous time while the following conditions are established is more than the predetermined time.

JUDGMENT VALUE

Malfunction Criteria Threshold Value DTC
Pressure variation value when the LH combination valve is switched ≥ Value of Map 7 P2443

Time Needed for Diagnosis:  4000 ms + 992 ms + 992 ms + 992 ms