LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Diagnostic Trouble Code (DTC) Detecting Criteria (H4DOTC)) >> Diagnostic Trouble Code (DTC) Detecting Criteria >> DTC P0341 Camshaft Position Sensor "A" Circuit Range/Performance (Bank 1 Or Single Sensor) >> Diagnostic Method

Diagnostic Method

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

When the amount of camshaft sensor signal during 2 revs of crankshaft is not 3 time(s) continuously, judge as NG.

JUDGMENT VALUE

Malfunction Criteria Threshold Value
Amount of camshaft sensor signal during 2 revs of crankshaft. 3 time(s)

Time Needed for Diagnosis:  2 engine revs x 4 time(s)

Malfunction Indicator Light Illumination:  Illuminates as soon as a malfunction occurs.

Judge as OK and clear the NG when the malfunction criteria below are met.

JUDGMENT VALUE

Malfunction Criteria Threshold Value
Camshaft position sensor signal = 3 time(s)

Time Needed for Diagnosis:  Engine two revolutions