Enable Condition
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
ENABLE CONDITION
| Secondary Parameters | Enable Conditions |
|---|---|
| Engine coolant temperature at engine starting | < 200 °C (392 °F) |
| Battery voltage | ≥ 10.9 V |
| Continuous time when the vehicle speed is less than 200 km/h (124.3 MPH) | ≥ 1 s |
| Engine coolant temperature | ≥ 70 °C (158 °F) |
| Intake air amount sum value | ≥ Value of Map 1 |
| Number of experiences under conditions below | ≥ 3 time(s) |
|
≥ Value from Map 2 |
|
≥ 15 s |
| and | |
| Establishing time of 1, 2 | ≥ 15 s |
| 1. Intake air amount | ≥ 15 g/s (0.53 oz/s) |
| 2. Vehicle speed | ≥ 4 km/h (2.5 MPH) |
MAP 1
| Engine coolant temperature °C (°F) | -20 (-4) | -10 (14) | 0 (32) | 10 (50) | 20 (68) |
| Intake air amount sum value g (oz) | 76000 (2680.52) | 10192 (359.47) | 9028 (318.42) | 7864 (277.36) | 6700 (236.31) |
MAP 2
| Engine coolant temperature °C (°F) | -20 (-4) | -10 (14) | 5 (41) | 20 (68) |
| Continuous time (s) when vehicle speed is less than 4 km/h (2.5 MPH) | 250 | 40 | 32 | 24 |