Enable Condition
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
ENABLE CONDITION
| Secondary Parameters |
Enable Conditions |
| Time of establishing all secondary parameter conditions |
≥ 3000 ms |
| Battery voltage |
≥ 10.9 V |
| Engine speed |
≥ 1300 rpm |
| Engine coolant temperature |
≥ 60 °C (140 °F) |
| AVCS control |
Operation |
| Target timing advance change amount (per 64 ms) |
< 1.07 °CA |