LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Power Steering System) >> Steering Gearbox >> Inspection >> Oil Leakage

Oil Leakage

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Power Cylinder, Rack Piston, Input Shaft, Cylinder, Rack Axle And Valve Housing
G08565821Courtesy of SUBARU OF AMERICA, INC.
  1. Lift up the vehicle.
  2. If a fluid leak is found, clean the fluid completely from the suspect area, and turn the steering wheel 30 to 40 times to the left and right from lock to lock, with the engine running, and check again for leaks immediately, and also after a few hours have passed.
  3. Cause and solution for oil leakage from "a"

    The oil seal is damaged. Replace the valve assembly or oil seal with a new part.

  4. Cause and measure for oil leakage from "b".

    The torsion bar O-ring is damaged. Replace the valve assembly with a new part.

  5. Cause and measure for oil leakage from "c".

    The oil seal is damaged. Replace the oil seal with a new part.

  6. Cause and solution for oil leakage from "d".

    The pipe is damaged. Replace the faulty pipe or O-ring.