LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Emission Control Systems (Aux. Emission Control Devices) (H4DOTC)) >> Shut Valve >> Removal

Shut Valve: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Place "NO OPEN FLAMES" signs near the working area.
CAUTION: Be careful not to spill fuel.
  1. Remove the fuel filler pipe. < Refer to REMOVAL , Fuel Filler Pipe. >
  2. Disconnect the evaporation hose from the shut valve.
    Fig 1: Locating Evaporation Hose Clamp
    G08570990Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the shut valve from the fuel filler pipe.
    Fig 2: Locating Shut Valve Nuts
    G08570991Courtesy of SUBARU OF AMERICA, INC.