LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Emission Control Systems (Aux. Emission Control Devices) (H4DOTC)) >> Secondary Air Combination Valve >> Installation >> Secondary Air Combination Valve LH

Secondary Air Combination Valve LH

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE: Use a new gasket.

Tightening torque: 

T1: 6.4 N.m (0.7 kgf-m, 4.7 ft-lb) 

T2: 9 N.m (0.9 kgf-m, 6.6 ft-lb) 

T3: 19 N.m (1.9 kgf-m, 14.0 ft-lb) 

Fig 1: Identifying Secondary Air Combination Valve Components (Lh) With Tightening Torque & Sequence
G08571030Courtesy of SUBARU OF AMERICA, INC.