Pressure Control Solenoid Valve Assembly: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.

Fig 1: Disconnecting/Connecting Battery Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Lift up the vehicle.
Disconnect the connector (A) and evaporation hose (B) from the pressure control solenoid valve assembly.
Remove the nut (C) securing the bracket to the fuel tank and remove the pressure control solenoid valve assembly.

Fig 2: Identifying Connector, Evaporation Hose And Nut
Courtesy of SUBARU OF AMERICA, INC.