PCV Valve: Installation

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install the PCV valve to the PCV connector and connect the vacuum hose (A) to the PCV valve.
NOTE: Use a new clamp for the PCV connector clamp, fit the cut out in the ST with the protrusion on the clamp as shown in the figure, and lock the clamp.

ST 18353AA000 CLAMP PLIERS

Fig 1: Removing/Installing PCV Hose Clamp Using Clamp Pliers
Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Locating PCV Hose Assembly Pipe And Clamp
Courtesy of SUBARU OF AMERICA, INC.
Install the secondary air combination valve RH. < Refer to INSTALLATION , Secondary Air Combination Valve. >
Install the intake manifold. < Refer to INSTALLATION , Intake Manifold. >
Install the collector cover.