LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Exhaust System (H4DOTC)) >> Rear Exhaust Pipe >> Removal

Rear Exhaust Pipe: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.
  1. Lift up the vehicle.
  2. Remove the center exhaust pipe from rear exhaust pipe.
    Fig 1: Identifying Rear Exhaust Pipe And Center Exhaust Pipe
    G05661008Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the muffler from rear exhaust pipe.
    CAUTION: Be careful not to drop the rear exhaust pipe.
    Fig 2: Locating Muffler Nut At Rear Exhaust Pipe
    G05659924Courtesy of SUBARU OF AMERICA, INC.
  4. Apply a coat of spray type lubricant to the mating area of cushion rubber.
  5. Remove the rear exhaust pipe from the cushion rubber.
    CAUTION: Be careful not to let the muffler contact the rear bumper.
    Fig 3: Locating Rear Exhaust Pipe Cushion Rubber
    G08539469Courtesy of SUBARU OF AMERICA, INC.