Front Exhaust Pipe: Assembly

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install the exhaust manifold RH and the exhaust manifold LH to the front exhaust pipe.
NOTE: Use a new gasket.

Tightening torque:

42.5 N.m (4.3 kgf-m, 31.3 ft-lb)

Fig 1: Identifying Front Exhaust Pipe, Exhaust Manifold RH, Exhaust Manifold LH And Gasket
Courtesy of SUBARU OF AMERICA, INC.
Install the exhaust manifold RH upper cover.
Tightening torque:

19 N.m (1.9 kgf-m, 14.0 ft-lb)