Transfer Driven Gear: Assembly

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Using the ST, install the roller bearing (extension case side).
CAUTION: Do not apply a load in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton).

ST1 398177700 INSTALLER

ST2 899864100 REMOVER

Fig 1: Installing Roller Bearing (Extension Case Side) Using ST
Courtesy of SUBARU OF AMERICA, INC.
Using ST, install the roller bearing (transfer case side).
CAUTION: Do not apply a load in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton).

ST 499757002 INSTALLER

Fig 2: Installing Roller Bearing (Transfer Case Side) Using ST
Courtesy of SUBARU OF AMERICA, INC.