Extension Case

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Using the ST, install the oil seal to the extension case. < Refer to OIL SEAL . >
NOTE: Use a new oil seal.
Install the shift bracket to extension case.
Tightening torque:

24.5 N.m (2.5 kgf-m, 18.1 ft-lb)

Fig 1: Installing Shift Bracket To Extension Case
Courtesy of SUBARU OF AMERICA, INC.
Install the transfer drive gear to the extension case. < Refer to INSTALLATION , Transfer Drive Gear. >