Reverse Check Sleeve: Inspection

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Make sure the cutout of the reverse accent shaft is aligned with the opening in the reverse check sleeve.
Turn the cam by hand to check for smooth rotation.
Move the cam and shaft all the way toward the plate, and make sure it releases. If the cam does not return properly, replace the reverse check spring. If the shaft does not return, check for scratches on the inner surface of sleeve. If the sleeve is in good order, replace the spring.

Fig 1: Identifying Snap Ring Plate, Reverse Check Plate And Reverse Check Spring
Courtesy of SUBARU OF AMERICA, INC.
Select a suitable reverse accent shaft and reverse check plate. < Refer to ADJUSTMENT , Reverse Check Sleeve. >