Reverse Check Plate Adjustment
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Shift the shifter arm to "5th" and then to reverse to see if the reverse check mechanism operates properly.
- Also check to see if the arm returns to neutral when released from the reverse position. If the arm does not return properly, replace the reverse check (A) Snap ring plate.
Reverse check plate Part No. (A): No. Angleø Remarks 32189AA001 0 28° Arm stops closer to 5th gear. 32189AA011 1 31° Arm stops closer to 5th gear. 32189AA021 2 34° Arm stops in the center. 32189AA031 3 37° Arm stops closer to reverse gear. 32189AA041 4 40° Arm stops closer to reverse gear.