Enable Condition (PZEV Model)

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

MONITOR A1 - PRIMARY OXYGEN SENSOR FLUCTUATION

Secondary Parameters	Enable Conditions
Closed loop control with primary oxygen sensor	Active
Engine speed	> 1400 rpm
	and
	< 3000 rpm
Engine coolant temperature	> 70 °C (158 °F)
Intake air mass	≤ 1.0 g/rev (0.04 oz/rev) (AT model)
	≤ 0.9 g/rev (0.03 oz/rev) (MT model)
Integrated time of canister purge after engine start	≤ 20.48 s
Learning value of EVAP density during purge	< 0.07

MONITOR B1 - CRANKSHAFT SPEED FLUCTUATION

Secondary Parameters	Enable Conditions
Misfire diagnosis monitor	Active
Engine coolant temperature	> 70 °C (158 °F)
Idle switch	ON
Vehicle speed	≤ 1.93 km/h (1.2 MPH)
Engine speed	> 450 rpm
	and
	< 900 rpm (AT model)
	> 450 rpm
	and
	< 900 rpm (MT model)
Intake air mass per revolution	< 0.45 g/rev (0.02 oz/rev) (AT model)
	< 0.35 g/rev (0.01 oz/rev) (MT model)