Enable Conditions
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
ENABLE CONDITION
| Secondary Parameters | Enable Conditions |
|---|---|
| Ignition switch | ON |
| Engine speed | < 300 rpm |
| Vehicle speed | < 1 km/h (0.621 MPH) |
| Soaking time | ≤ 60 s |
| Variation value of intake manifold pressure (absolute pressure) since ignition switch is turned to ON | < 1.332 kPa (9.99 mmHg, 0.39 inHg) |
| ELCM vacuum pump | Not in operation |
| ELCM switching valve | Open |
| Purge control | Not in operation |