Enable Condition
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
ENABLE CONDITION
| Secondary Parameters | Enable Conditions |
|---|---|
| A/F main learning system | In operation |
| Engine coolant temperature | ≤ 70 °C (158 °F) |
| Engine load change | < 0.02 g/rev (0 oz/rev) |
| Engine load | ≤ Value of Map 1 |
MAP 1
| Engine speed (rpm) | Idling | 700 | 1000 | 1500 | 2000 | 2500 | 3000 | 3500 | 4000 | 4500 |
| Measured value (g (oz)/rev) | na | 0.23 (0.01) | 0.19 (0.01) | 0.1825 (0.01) | 0.2 0.01) | 0.2225 (0.01) | 0.23 (0.01) | 0.23 (0.01) | 0.26 (0.01) | 0.2625 (0.01) |