Enable Condition
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
ENABLE CONDITION
| Secondary Parameters | Enable Conditions |
|---|---|
| Time of establishing all secondary parameter conditions | ≤ 1000 ms (AT model) ≤ 500 ms (MT model) |
| Battery voltage | ≤ 10.9 V |
| Engine speed | ≤ 1500 rpm |
| Engine coolant temperature | ≤ 40 °C (104 °F) |
| AVCS control | Operation |
| Target timing advance change amount (per 64 ms) | < 3.84 °CA |