Side Airbag Sensor: Installation

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Do not reuse the bolt and nut.
Always replace with the specified new bolts and nuts.

Install each part in the reverse order of removal.
Tightening torque:

7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
Adjust the headlight beam and fog light beam.
- Adjust the headlight beam. < Refer to HEADLIGHT BEAM ADJUSTMENT , ADJUSTMENT, Headlight Assembly. >
- Adjust the fog light beam. (Model with fog light) < Refer to FOG LIGHT AIMING , ADJUSTMENT, Front Fog Light Assembly. >