Roll Connector: Adjustment
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Do not rotate the roll connector to more than the specified number of turns. Otherwise, the roll connector internal wire may be broken.
- When determining the end stop, rotate the connector slowly without applying excessive force. Applying excessive force at the end stop may break the internal wire.
- Check that front wheels are positioned in straight ahead direction.
- Turn the roll connector pin (A) clockwise until it stops.
- Turn the roll connector pins (A) approx. 3.25 turns until "Δ" marks are aligned.