Passenger's Seat
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Check for the following, and replace the damaged parts with new parts.
- Seat belt buckle body or bracket is scratched, cracked or deformed.
- Backrest frame for crack or deformation
- Headrest for deformation or play
- If the seat cushion cover and seat backrest cover is scratched or coming loose, replace with a new cover and readjust the system. < Refer to OPERATION , System Calibration (Rezeroing). >
CAUTION: If any of the following applies, replace the seat cushion pad and frame assembly. Do not disassemble.- Cracks or deformation found in the seat cushion frame or seat cushion pad.
- Scratches, cracks, or deformation found on the passenger detection system pressure sensor hoses or passenger detection control module, or attachment brackets of the control module.
- Harness and/or connector is cracked, deformed or open. Harness wire is exposed.
- After checking the installing condition of passenger's seat, perform the system calibration of occupant detection system. < Refer to OPERATION , System Calibration (Rezeroing). >