Curtain Airbag Sensor: Installation

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Do not reuse the bolt and nut.
Always replace with the specified new bolts and nuts.
When installing the sensor, insert the set pin on the backside of the sensor into the hole on the body side securely.

Install each part in the reverse order of removal.

Tightening torque:

7.5 N.m (0.76 kgf-m, 5.5 ft-lb)