LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Air Bag System) >> Airbag Connector >> Procedure >> Satellite SAFING Sensor

Satellite SAFING Sensor

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. How to disconnect:
    CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.

    Holding outer part (A), pull it in the direction of arrow.

    Fig 1: Pulling Satellite Safing Sensor Connector
    G05003911Courtesy of SUBARU OF AMERICA, INC.
  2. How to connect:
    CAUTION:
    • Do not touch the outer side section or else the outer side (A) will move back.
    • Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.

    Holding the connector, push it in securely until a clicking sound is heard.

    Fig 2: Pushing Satellite Safing Sensor Connector
    G05003912Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals