Buckle Switch RH

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

How to disconnect:
CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
1. Move the slide lock (A) in the direction of arrow and hold it.
2. With the slide lock (A) moved, pull the connector (B) in the direction of arrow.
  
  Fig 1: Disconnecting Buckle Switch RH Connector
  Courtesy of SUBARU OF AMERICA, INC.
How to connect:
CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.

Holding the connector, push it in securely until a clicking sound is heard.

Fig 2: Connecting Buckle Switch RH Connector
Courtesy of SUBARU OF AMERICA, INC.