LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Anti-Theft System - Security And Locks) >> Rear Gate Latch and Actuator Assembly >> Removal

Rear Gate Latch and Actuator Assembly: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the rear gate trim. < Refer to REMOVAL , Rear Gate Trim. >
  3. Disconnect the harness connector of rear gate latch and actuator assembly.
  4. Remove the bolts, and remove the rear gate latch & actuator assembly.
    Fig 1: Locating Bolts Of Rear Gate Latch And Actuator Assembly
    G05663692Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals