LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Exterior Body Panels) >> Rear Gate >> Installation >> Rear Gate Damper Stay

Rear Gate Damper Stay

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Prevent the rear gate from closing using prop or the like.
    CAUTION: If the prop comes off, operators may get injured and vehicle may get damaged. Make sure to support the rear gate with secure material to prevent injury or damage.
    Fig 1: Supporting Rear Gate
    G05958217Courtesy of SUBARU OF AMERICA, INC.
  2. Install each part in the reverse order of removal.

    Tightening torque: 

    Refer to "COMPONENT" of "General Description".< Refer to  REAR GATE  , COMPONENT, General Description. >