Rear Gate: Adjustment

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

For the panel clearance around the rear gate panel, refer to "SPECIFICATION" in "General Description".< Refer to SPECIFICATION , General Description. >

Adjust the rear gate panel position in the vertical and horizontal directions.

Fig 1: Locating Rear Gate Panel Hinge Bolts
Courtesy of SUBARU OF AMERICA, INC.
1. Loosen the hinge mounting bolts.
2. Adjust the panel clearance for the rear gate panel in the vertical and horizontal directions.
Adjust the height difference between the rear gate panel and the body.

Fig 2: Adjusting Height Difference Between Rear Gate Panel And Body
Courtesy of SUBARU OF AMERICA, INC.
1. Loosen the bolts.
2. By tapping on the striker with a plastic hammer, adjust the height difference between the rear gate panel and the body.