Protector Tape: Installation
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Clean the area around applying position to remove any foreign objects on body.
- Detach the backing paper and apply the protector tape after positioning it correctly.
- Detach the backing papers, and moisten the applying area and the backside of protector tape by spraying liquid (mild detergent solution at 3% concentration).
- Apply the protector tape to the vehicle body.CAUTION: Remove the water or air bubbles out of the protector tape by using the plastic or rubber spatula.
- Remove the application tape.