Front Sealing Cover: Installation
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Install each part in the reverse order of removal.
- When replacing the sealing cover, use the butyl tape.
- Press the butyl tape-applied area firmly to prevent any floating on surface.
Butyl tape:
3M8626 or the equivalent
NOTE:- Apply a uniform bead of butyl tape.
- Attach the sealing cover, keeping it from becoming wrinkled.
- Breaks in the bead will allow water leakage and contamination.