Front Hood: Adjustment

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Adjust the clearance between front hood panel and front fender panel. Clearance must be equal at both sides. For the dimension of clearance, refer to "SPECIFICATION" in "General Description".< Refer to SPECIFICATION , General Description. >
Use the hinge mounting bolts to align the front hood longitudinal and lateral position.

Fig 1: Locating Front Hood Hinge Mounting Bolts
Courtesy of SUBARU OF AMERICA, INC.
Adjust the height at the front end of hood.< Refer to ADJUSTMENT , Front Hood Lock Assembly. >
Rotate the hood buffer to adjust lateral height.

Fig 2: Locating Hood Buffer
Courtesy of SUBARU OF AMERICA, INC.