Door Sash Tape: Installation: Notes

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Press evenly along the sash when applying the tape using a spatula or similar object to make sure no bubbles are formed. If air bubbles are formed, reapply the tape.
If the tape is wrinkled, etc. during application, replace the tape.
Be sure to press the ends of the tape firmly to adhere securely. If the tape comes off at the ends or where folded, the adhesive strength is weakened and the tape may peel off.
There are locations where the tape ends will overlap each other. When applying the tape, be careful of the order of their application.
- Front
  
  Fig 1: Identifying Door Sash Tape - Front
  Courtesy of SUBARU OF AMERICA, INC.
- Rear
  
  Fig 2: Identifying Door Sash Tape - Rear
  Courtesy of SUBARU OF AMERICA, INC.