Diagnostic Procedure
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK DRAIN TUBE BETWEEN CANISTER AND LEAK CHECK VALVE ASSEMBLY. | Is the drain tube between canister and leak check valve assembly clogged? | Replace the drain tube between the canister and leak check valve assembly. < Refer to CANISTER . > | Go to step 2. |
| 2 CHECK HOSES BETWEEN CANISTER AND FUEL TANK. | Are the hoses between the canister and fuel tank clogged? | Replace the hoses between the canister and fuel tank. < Refer to CANISTER . > < Refer to FUEL TANK . > | Replace the canister. < Refer to
CANISTER
. > After the operation is complete, go to the next step. Go to step 3. |
| 3 CHECK EVAPORATIVE EMISSION CONTROL SYSTEM. Perform drive cycle I. < Refer to DRIVE CYCLE H , PROCEDURE, Drive Cycle. > |
Is DTC P1451 displayed on the display? | Replace the leak check valve assembly. < Refer to LEAK CHECK VALVE ASSEMBLY . > | End. |