Diagnostic Procedure
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK FOR ANY OTHER DTC ON DISPLAY. | Is any other DTC displayed? | Check the appropriate DTC using the "List of Diagnostic Trouble Code (DTC)". < Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . > | Go to step 2. |
| 2 CHECK WASTEGATE ACTUATOR PIPING AND WASTEGATE CONTROL SOLENOID VALVE PIPING. | Are there any damage or disconnection of hose in wastegate actuator piping or wastegate control solenoid valve piping? | Connect the wastegate actuator pipe or wastegate control solenoid valve pipe properly. If defective, replace the hose. | Replace the wastegate control solenoid valve. < Refer to WASTEGATE CONTROL SOLENOID VALVE . > |