Body Integrated Unit

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

On «Main Menu» display, select {Each System Check}.
On «System Selection Menu» display, select {Integ. Unit}.
After {Integ. unit} is displayed, select [OK].
On «Integ. unit mode failure diag.» display, select {Diagnostic Code(s) Display}.
NOTE:
- For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
- For detailed concerning DTC, refer to the List of Diagnostic Trouble Codes (DTC).< Refer to LIST , List of Diagnostic Trouble Code (DTC). >