LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine Lubrication System (H4DO)) >> Oil Pan And Strainer >> Removal >> Oil Pan Upper

Oil Pan Upper

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine from the vehicle. < Refer to REMOVAL , Engine Assembly. >
  2. Remove the water pump. < Refer to REMOVAL , Water Pump. >
  3. Remove the thermostat cover. < Refer to REMOVAL , Thermostat. >
  4. Remove the water pipe assembly. < Refer to WATER PUMP , COMPONENT, General Description. >
  5. Remove the oil pan. < Refer to OIL PAN , REMOVAL, Oil Pan and Strainer. >
  6. Remove the bolts which secure oil pan upper to cylinder block, and remove the oil pan upper.
    Fig 1: Identifying Oil Pan Upper To Cylinder Block Mounting Bolts
    G07665073Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the baffle plate from the oil pan upper.
  8. Remove the oil strainer from the oil pan upper.
  9. Remove stud bolts from the oil pan upper.
    Fig 2: Identifying Oil Pan Upper And Related Components
    G08570231Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals